TimberTool Tree-Felling Jack TimberTool Tree-Felling Jack
TimberTool Tree-Felling Jack

TimberTool Tree-Felling Jack


  • Pushes the tree in the direction of your fall line
  • Reduces the need to wedge or cable
  • Fell trees more safely & precisely

Product Details

Item No. 41260

Fell trees faster, safer and more accurately with the Norwood TimberTool™ Tree-Felling Jack.

Like a high-lift jack, the TimberTool cranks up to 1.8 tons/inch pressure against the tree.  This power helps:

  • Push the tree in the fall-line you’ve chosen.
  • Force the felling cut open so the tree can’t settle and bind your chainsaw bar.
  • Reduce the need for time-consuming wedging and cabling.

Ruggedly built of high-grade, close-tolerance steel, the TimberTool is also equipped with sharp teeth to bite strong in the tree and a hooked base to dig firmly into the ground.

The TimberTool is a must for anyone who wants to fell trees more safely, precisely and professionally.

Technical Data

Length: 4’4” (1.30m)
Length: 8’1” (2.43m)
Board Width: 36 lbs (16kg)
Ratio/Lift Capacity: 27/4,950 lbs (2,200 kg)

Actual load & limitations of the TimberTool vary depending upon terrain, tree height,
weight, size and angle of lean. Good judgment and experience required.

Reviews 1

Write Your Own Review
80% of 100
4 / 5
1  review
You are rating:TimberTool Tree-Felling Jack
Your rating