15 posts / 0 new
Log in or register to post comments
Last post
Fri, 2022/03/25 - 10:02pm
#1
DaveM
DaveM's picture
Winter Kill
So...the snow has finally almost melted here in the southern tier of N.Y. Went to put the battery back on the mill & low & behold, the mice decided to become electricians & work on the wiring !! Only spent about 2 hours trying to replace the stripped & chewed wires. Not as simple as connecting black to black & blue to blue as they removed the shielding. Anyone else have any surprises when unretiring their mill from it's long winter nap ? Hopefully, this will stay on topic & not degenerate with spammers posting with topics totally unrelated to this forum !!
Top
Mon, 2022/03/28 - 12:05am
DavidM
DavidM's picture
I was able to start my mill once a week during the winter, but haven’t tried to cut anything. I’ve been working on building a log trailer and rig to make it easier to bring logs to my mill all fall and winter - finally got someone to help me and loaded the first logs with it today. Works really well.
Top
Mon, 2022/03/28 - 12:13am
DavidM
DavidM's picture

Top
Mon, 2022/03/28 - 12:14am
DavidM
DavidM's picture
Not exactly sure why picture flipped upside down lol. Will try a different one.
Top
Mon, 2022/03/28 - 11:27am
(Reply to #4)
DaveM
DaveM's picture
Thank GOD it was only the picture !!
Top
Mon, 2022/03/28 - 4:30pm
DavidM
DavidM's picture
For sure - roll over with those logs would leave a mark. Lol
Top
Wed, 2022/04/20 - 10:47am
DavidM
DavidM's picture
Lol I started to comment this morning, but decided to email Norwood again instead. I don’t think either one is reading their mail. It amazes me that so many people will spam posts about spammers - we may be dealing with machines not people.
Top
Wed, 2022/04/20 - 10:53am
(Reply to #7)
DaveM
DaveM's picture
I'm going to keep denigrating them on every email I get telling me there is a new response.
Top
Sun, 2023/03/05 - 6:29pm
oneoldcoot
oneoldcoot's picture

my sawmill has been down for 2 years due to life and stuff. Any ideas on what to do before I try to start it>

A preacher preaches, A pastor shepherds

Top
Sun, 2023/03/05 - 8:30pm
DaveM
DaveM's picture
Hey there oneoldcoot!!! Hope all is well with you. I would for sure change the oil as I'm sure there has been a bit of condensation with it sitting idle for so long. Pull the sparkplug & either clean or replace it. Check the air filter as mice have a knack of getting in places they don't belong. If possible, replace the gas in case you didn't run it dry & put some carb cleaner in the fuel in case the carb varnished up with the old gas. Lube the zerk fittings as well. Hope I covered the most important bases. I'm no mechanic, but I know just enough to be dangerous. Thank You for not being a troll !!!!
Top
Mon, 2023/03/06 - 2:57pm
Bill
Bill's picture
Drain the fuel and put some sea foam in the fresh fuel .
Top
Mon, 2023/03/06 - 7:28pm
Bill
Bill's picture
You gave him good advice Dave I could only add from my experience with old gas in small engines.
Top
Mon, 2023/03/06 - 8:11pm
DaveM
DaveM's picture
And that is exactly why this forum was created. So members could offer and add to comments to assist others. Let's hope more of the old regulars return as Norwood seems to be making an effort to eliminate the rectal orfices that have been lurking here.
Top
Thu, 2023/04/20 - 10:48pm
DaveM
DaveM's picture
WOW...the forum has been deadly quiet lately. No new comments or topics. I hope Norwoods "troll" patrol isn't blocking everything !! 🤔
Top
Fri, 2023/04/21 - 11:29am
Bill
Bill's picture
It's same David because unless I recognize a name I don't open the link this could leave new members out of the loop and the nonsense could also drive them away from the site.
Top