You are here

6 posts / 0 new
Last post
RyanC
RyanC's picture
Sealing wood for outdoor benchs
I’m in the process of making quite a number of live edge benches, these will be left outdoors What type of sealers, stains etc do you guys use or can recommend to increase longevity, inhibit mold, etc Thanks in advance!
RW Moore
RW Moore's picture
Ryan, I have used a variety of finishes including urethane, linseed oil, wood sealer/preservative on exterior benches and chainsaw carvings. The carvings get a lot of weather. My preference is MinWax Helmsman spar urethane satin finish. I am located in the Ottawa Valley where temperatures vary from -30c to +35c. I have found the product stands up well to to temperature, sunlight exposure, humidity and moisture. I usually apply three coats, sanding with 220 grit between the 2nd and 3rd coats. The product lasts 2 to 3 years before needing reapplication. There is also a product sold by Canadian Tire Armor Coat Spar Finish which is intended for application on boats and a number of marine varnishes available in both the US and Canada such as Epifanes which I am told is a very good product for exterior exposure. Epifanes is a bit more expensive.
RyanC
RyanC's picture
Thanks RW, I have used the helmsman on some outdoor signs and it didn’t even cross my mind! I used to live down in that area briefly it’s a beautiful place, especially this time of year. I’ll take a look at the armour coat as well. Cheers!
r.garrison1
r.garrison1's picture
I don't know if it is better or worse than any other finish, but I like linseed oil/turpentine to soak into the wood first, then if I really want to protect it, I use a urethane or spar varnish on top as a sealer. My thoughts are that the wood lasts better if it has some oil in it, but the surface coat protects best against weather.
Bill
Bill's picture
I wouldn't but anything on a bench that sits out side that could peel. The best finish I've used on bench's so far was a gal. of semi clear oil based stain I bought for $8 gal.in a discount store so far I've only put a second coat once in 5 or 6 years.
RyanC
RyanC's picture
Thanks everyone. Sounds like I have some experimenting to do this weekend
Facebook icon
Twitter icon
LinkedIn icon
YouTube icon