To increase your output, particularly to process large volumes of dimensional lumber, consider adding Norwood Computer Setworks to your LumberPro HD36. The HD36 is the world’s only bandmill that starts manually configured but, at any time, you can upgrade to operate with computer setworks (Item No. LM34-PSH-5000SW).

“Mark” your first cut to give the computer its original point of reference. After each cut, the computer will then automatically raise the sawhead to the correct height to safely return to the starting point. Press “Set” and the sawhead automatically descends ready for the next cut to your programmed board thickness.

Versatile and Easy-to-Use: Quickly change board thickness from one cut to the next – The computer comes pre-programmed with 10 different depth-of-cut settings. Or easily reprogram any of your ten pre-sets to cut your own specialty dimensions. You can also change the program to saw in inches or millimeters in increments of 0.001” or 0.1mm.

Self-Calibrating: Supremely precise, the computer continuously measures the lineal position of the sawhead to evaluate accuracy. Based on tight-tolerance parameters, the computer calculates overage/shortage and automatically re-calibrates itself to remain accurate to within 1/32” without the need for manual intervention. Optional Remote Operation: The standard control panel installed at the operator’s station allows you to both program and operate the setworks. Add an optional cabled pendant to operate the computer-controlled sawhead remotely. (Item LM34-PSH-5000SW)

For more information, visit https://www.norwoodsawmills.com/en_us/computer-setworks-for-hd36

Read more...

Share